With the development of society, not only the agriculture and service sectors develop but also the industry also develops rapidly. Silicon glue gun is the clearest demonstration of this creation. The silicone glue gun was born to replace other old equipment to make human work faster and easier. The silicone glue gun is an item used to pump silicon glue accurately and regularly to beautify and bond materials in construction works. I will help you understand more clearly about the silicon glue gun. How to use the silicone glue gun? You and I learn together about it.
Some information about the silicone glue gun
The silicone glue gun is an item used to pump silicon glue accurately and regularly to beautify and bond materials in construction works. In particular, glue gun helps create standard shooting lines on every detail including those with complicated shapes such as curves, cracks, …
The silicone glue gun is easy to use and store, you can manually use the glue gun to execute silicon shot. However, it requires you to know how to use a silicone glue gun as well as silicon glue products.
I will guide you 4 steps on how to use glue gun properly for the most accurate shot. Let’s refer together.
How to use the silicone glue gue?
Step number 1: Cut the tip of the glue tube by the size of the place to be glued. Should cut the tip slightly tilted about 45 degrees. Then, install the glue gun into the cut bottle. Tightening moderately to avoid tightening will result in broken nozzle damaging the glue bottle.
Step number 2: Put the silicone glue tube inside the silicon glue gun. Then, gently pull the trigger until the lever is pushed slowly into the tube. And you just squeeze the trigger until you need to push the contact with the diaphragm. You should avoid squeezing the gun too hard or the glue will spill from the nozzle.
Step number 3: Start firing glue by putting glue gun at the position to paste. Squeeze the trigger, move the glue gun evenly with your hand so that the silicon spreads out evenly.
Step number 4: Wait for the glue to dry then trimming the excess glue and clean toilets.
Every step use is indispensable in the glue gun, you need to pay attention to that problem.
The note you know when using the silicone glue gun include
When using a glue gun, but it simple but you still need to be some note the following:
You should not disassemble the parts of the gun such as push bar, springs, trigger, body gun. This will cause the movement mechanism to mismatch or you may not be able to reassemble the gun in its original position.
Moreover, you do not leave the gun in wet environments, do not leave the gun upside down. If using the oil for a long time, it should be lubricated to make it easier to use.
And you need to lock the bolt gun if stopped to prevent the glue, otherwise, the glue will continue to flow out.
After using the gun, remove the glue bottle from the gun. You must wipe off the stains on the gun. If the remaining glue bottle is not used up, take the cap back and store it for later use. That’s a way to use the glue gun. You will see to know more clearly about it before you use.
The silicone glue gun is a pretty useful device and its usage is very easy. It is a very suitable device for people. With the instructions for using the silicone glue gun below, I hope you will have beautiful and aesthetic lines. You should read my guide for useful information. I hope you find a way to use the best for yourself.